 |
| |
|
E-mail
Sales
Tel. 304 743 1168 Fax. 304 743 9227 |
|
|
|
|
|
|
|
| |
|
Alloy 600 is nickel-chromium alloy with good oxidation resistance
at high temperatures and resistance to chloride-ion
stress-corrosion cracking, corrosion by high-purity water, and
caustic corrosion. Used for furnace components, in chemical and
food processing, in nuclear engineering, and for sparking
electrodes. |
|
Specifications |
|
UNS |
W.Nr. |
AMS |
FED |
ASTM |
BS |
|
N06600 |
2.4816 |
5687 |
QQ-W-390 |
B166 |
3075 & |
|
|
|
|
|
|
3076 |
|
|
|
|
|
|
NA14 |
|
|
| C - .15max |
Ti - .50max |
Furnace Muffles |
| Mn - 1.00max |
Cb+Ta - 1.0max |
Electrical
Components |
| S - .015max |
Co - 1.0max |
Jet Engine Parts |
| Si - .50max |
|
Springs |
| Cr - 14/17 |
|
Chemical and Food |
| Ni - 72.0 |
|
Processing Equipment |
| Cu - .50max |
|
Bellows |
| Fe - 6/10 |
|
Furnace Belts |
| Al - .35max |
|
|
|
PHYSICAL PROPERTIES (ANNEALED CONDITION) |
| Modulus of Elasticity, Tension
10(******)psi - 31.0 |
| Magnetic permeability at
200H(At 70 F) - 1.010 |
| Electrical Resistivity,
Microhm-cm(At 70 F) - 103 |
| Density, lb/cu.in. - .304 |
| Coefficient of Thermal
Expansion, in./in./ F x 10(-******) |
| 70 - 200 F ............................
7.4 |
| 70 - 400 F ............................
7.7 |
| 70 - 800 F ............................
8.1 |
| 70 - 1000 F ...........................
8.4 |
| |
|
NOMINAL MECHANICAL PROPERTIES (ANNEALED CONDITION) |
| Ultimate Tensile Strength, psi - 90,000 |
| 0.2% Offset Yield Strength,
psi - 31,000 |
| Elongation in 2 inches
percent - 40 |
| Hardness, Rockwell - B65 |
| |
Availability
|
|
Diameter |
|
Wire - inch |
.005" - .162" |
|
- mm |
.13 - 4 |
|
|
Get
Quotation: Sales
Solicite un Precio |
|
 |
| INCONEL, MONEL, INCOLOY, INCO-WELD,
INCOFLUX, INCO-CORED, NI-ROD, 686CPT and 725NDUR are trademarks of
Special Metals. |
|
Disclaimer
Every effort is made to ensure that technical specifications are accurate.
However, technical specifications included herein should be used as a guideline
only. All specifications are subject to change without notice.
|
|
Site
© 2002 DRMS Metals
18558
Ashton Upland Road, Milton, WV. 25541 Tel. (001) 304-743-1168 Fax (001)
304-743-9227
Website
by FlackwellSystems.com
|
