|
Monel 404 |
|
| |
|
|
|
|
|
Specifications |
|
| |
UNS |
Wrk.
No. |
ASTM |
|
|
|
• UNS N04404 |
2.4867 |
• F96 |
|
| |
|
|
|
|
|
Typical Usage |
|
| |
|
|
|
|
|
Composition of this alloy is carefully adjusted to
provide low Curie temperature, low permeability, and good brazing
characteristics. Because its low permeability is not significantly
affected by processing and fabrication, the alloy is particularly
suitable for electronic parts. It can be fabricated by the same
procedures used for MONEL alloy 400. The alloy can be joined to itself
by the gas tungsten-arc welding process without the addition of filler
metal. |
|
| |
|
|
|
|
|
|
| Nominal |
Chemistry |
Available in: |
Thickness / Diameter |
|
|
(Main |
Elements) |
Sheet / Strip - inch |
.005" - .062" |
|
| Ni |
55 |
- mm |
.13 - 1.6 |
|
| Cu |
45 |
Wire - inch |
.005" - .125" |
|
| |
|
- mm |
.13 - 3 |
|
| |
|
Rod / Bar - inch |
.500" - 4.00" |
|
| |
|
- mm |
12 - 100 |
|
| |
|
|
|
|
| |
|
|
Get
Quotation: Sales |
|
| |
|
|
Solicite un Precio |
|
| |
|
|
 |
|
| |
|
|
|
| |
|
|
|
| INCONEL, MONEL, INCOLOY, INCO-WELD,
INCOFLUX, INCO-CORED, NI-ROD, 686CPT and 725NDUR are trademarks of
Special Metals. |
Disclaimer
Every effort is made to ensure that technical
specifications are accurate. However, technical specifications and all other
information included herein should be used as a guideline only.
All specifications are subject to change
without notice.
|
