DRMS Metals
 

DRMS METALS USA

E-mail Sales

Tel. 304 743 1168 Fax. 304 743 9227

DRMS Metals
 

Hardfacing Alloy # 6

         
   

Room Temperature

600 deg C

 

Typical Hardness RC

38-48

30-37

 

Specifications

 

American:

AWS A5.13 ERCoCr-A*, AWS A5.13 ECoCr-A*, AMS 5788  
    MIL-R-17131, Type MIL-RCoCr-A-1    
 

European:

DIN 8555: E20-UM-45-CRTZ    
 

UNS:

R30006, W73006    

* Standard specification for this product. Other specifications may be for similar products.

         

Description and Typical Usage

Deposit type & process - Cobalt based deposit of Stellite 6 "type". Deposit via TIG, MIG, SMA, or O-A..  
Properties - Very resistant to metal-metal wear and to corrosion up to 800˚C. Good resistance to thermal and  
                    mechanical shock. Good weldability. Resists galling in high load metal-to-metal wear applications.  
Typically used to hardface - valves, valve seats, bearings, shafts, rotors, hot shear blades, hot pressing tools, coke  
                                               pulverizers, sintering parts, extrusion screws, etc.
Electrodes Solid Wire and Rod  Cored Wire
Specification AWS A5.13 ECoCr-A AWS A5.13 ERCoCr-A AWS A5.13 ERCCoCr-A
Straight Lengths 14" ( 356 mm) long       10 lb (4.5 kg) containers 36" (914 mm) or 1000 mm long    10 lb (4.5 kg) containers
Spools / Coils 25 lb or 33 lb (15 kg) Spools*

25 lb or 33 lb (15 kg) Spools

Diameter inches

3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

.045, .062, .078, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

.045, .062, .093

Diameter mm

2.6, 3.2, 4, 5, 6.4, 8, 10

          1.2, 1.6, 2, 2.6,3.2, 4, 5, 6.4, 8, 10

1.2, 1.6, 2.4

* In diameters through .078" (2 mm) 

Nominal Chemistry - %

(Main Classifying Elements Only)

   Get Quotation: Sales

     

Solicite un Precio

 
  Cobalt base with:      
  C 1.1

Other Hardfacing Products

 
  Cr 28    
  W 4

 

 

 
       
       
Stellite® & Tribaloy® are registered trademarks of Deloro Stellite. Stoodite® is a registered trademark of Thermadyne.

Disclaimer - Every effort is made to ensure that technical specifications are accurate. However, technical specifications and all other information included herein should be used as a guideline only. All specifications are subject to change without notice.

 

Site © 2002 DRMS Metals

18558 Ashton Upland Road, Milton, WV. 25541 Tel. (001) 304-743-1168 Fax (001) 304-743-9227

Website by FlackwellSystems.com