DRMS Metals
 

DRMS METALS USA

E-mail Sales

Tel. 304 743 1168 Fax. 304 743 9227

DRMS Metals
 

Hardfacing Alloy # 1

         
   

Room Temperature

600 deg C

 

Typical Hardness RC

48-59

42-49

 

Specifications

 

American:

AWS A5.13 ERCoCr-C*, AWS A5.13 ECoCr-C*  
    MIL R-17131, Type MIL-RCoCr-C-1    
 

European:

DIN 8555: E20-UM-55-CTZ    
 

UNS:

R30001, W73001    

* Standard specification for this product. Other specifications may be for similar products.

         

Description and Typical Usage

Deposit type & process - Cobalt based deposit of Stellite 1 "type".  Deposit via TIG, MIG, SMA, or O-A.  
Properties - Good resistance to metal-metal wear, erosion, cavitation, and to corrosion up to 800˚C. Low coefficient of  
                   friction. Generally better wear resistance than Types 6 and 12 deposits, but with reduced impact properties.  
Typically used to hardface -seaming rolls, valve seats, rails, bearing and pump sleeves, pump shafts, wear pads,   
                                              bushings, saw blades, cutters, extrusion nozzles, hot cutting tools, conveyor screws.
Electrodes Solid Wire and Rod  Cored Wire
Specification AWS A5.13 ECoCr-C AWS A5.13 ERCoCr-C AWS A5.13 ERCCoCr-C
Straight Lengths 14" ( 356 mm) long       10 lb (4.5 kg) containers 36" (914 mm) or 1000 mm long    10 lb (4.5 kg) containers
Spools / Coils 25 lb or 33 lb (15 kg) Spools*

25 lb or 33 lb (15 kg) Spools

Diameter inches

3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

.045, .062, .078, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8

.045, .062, .093

Diameter mm

2.6, 3.2, 4, 5, 6.4, 8, 10

          1.2, 1.6, 2, 2.6,3.2, 4, 5, 6.4, 8, 10

1.2, 1.6, 2.4

* In diameters through .078" (2 mm) 

Nominal Chemistry - %

(Main Classifying Elements Only)

   Get Quotation: Sales

     

Solicite un Precio

 
  Cobalt Base with:      
  C 2.3

Other Hardfacing Products

 
  Cr 30    
W 13

 

 

       
       
Stellite® & Tribaloy® are registered trademarks of Deloro Stellite. Stoodite® is a registered trademark of Thermadyne.

Disclaimer - Every effort is made to ensure that technical specifications are accurate. However, technical specifications and all other information included herein should be used as a guideline only. All specifications are subject to change without notice.

 

Site © 2002 DRMS Metals

18558 Ashton Upland Road, Milton, WV. 25541 Tel. (001) 304-743-1168 Fax (001) 304-743-9227

Website by FlackwellSystems.com