|
Monel® alloy K500 |
|
| |
|
|
|
|
|
Specifications |
|
| W.Nr. |
UNS |
Federal
/ Mil |
AMS |
|
|
•
2.4375 |
• UNS N05500 |
• QQ-N-286 |
• 4676 |
|
| |
|
• MIL-N-17506 |
|
|
| |
|
|
|
|
|
Typical Usage |
|
| |
|
|
|
|
|
Alloy K500 is widely
used in marine environments, such as pump shafts, fasteners, propeller
shafts, rotor blades, valve trim, etc.. It is also used for similar
applications in the oil fields. It can be heat treated to attain higher
strength levels than Monel 400. |
|
| |
|
|
|
|
|
|
| Nominal |
Chemistry |
Available in: |
Thickness / Diameter |
|
|
(Main |
Elements) |
Sheet - inch |
.062" - .187" |
|
| Ni |
63 min |
- mm |
1.6 - 5 |
|
| Cu |
30 |
Plate - inch |
.250" - 2.00" |
|
| Al |
2.75 |
- mm |
6 - 50 |
|
| Ti |
0.6 |
Bars - inch |
1.00" - 6.00" |
|
|
|
|
- mm |
25 - 150 |
|
| |
|
|
|
|
| |
|
|
Get
Quotation: Sales |
|
| |
|
|
Solicite un Precio |
|
| |
|
|
 |
|
| |
|
Back to Super Alloys List |
|
| |
|
|
|
| INCONEL, MONEL, INCOLOY, INCO-WELD,
INCOFLUX, INCO-CORED, NI-ROD, 686CPT and 725NDUR are trademarks of
Special Metals. |
Disclaimer
Every effort is made to ensure that technical
specifications are accurate. However, technical specifications and all other
information included herein should be used as a guideline only.
All specifications are subject to change
without notice.
|
