|
Inconel® Alloy 725 |
|
| |
|
|
|
|
|
Specifications |
|
| |
UNS |
NACE |
|
|
|
|
• UNS N07725 |
• MR-01-75 |
|
|
| |
|
|
|
|
|
Typical Usage |
|
| |
|
|
|
|
| Alloy 725 is
highly resistant to corrosion and is age hardenable for extremely high
strength. The strength of this alloy is developed by heat treatment to
achieve high ductility and toughness. The alloy is resistant to hydrogen
embrittlement and stress-corrosion cracking. It is used for hangers,
landing nipples, side pocket mandrels and polished bore receptacles in
sour gas service. It is also used for high-strength fasteners in marine
applications. It is available in a standard grade and a high strength
grade. |
|
| |
|
|
|
|
|
|
| Nominal |
Chemistry |
Available in: |
Diameter |
|
|
(Main |
Elements) |
Bars - inch |
1.00" - 10.00" |
|
| Ni |
57 |
- mm |
25 - 250 |
|
| Cr |
21 |
Welding products for this alloy |
|
| Mo |
8.3 |
INCO-WELD® FM
725NDUR |
|
| Nb |
3.4 |
|
|
|
| Ti |
1.4 |
|
Get
Quotation: Sales |
|
|
Fe |
Bal |
|
Solicite un Precio |
|
| |
|
|
 |
|
| |
|
Back to Super Alloys List |
|
| |
|
|
|
| INCONEL, MONEL, INCOLOY, INCO-WELD,
INCOFLUX, INCO-CORED, NI-ROD, 686CPT and 725NDUR are trademarks of
Special Metals. |
Disclaimer
Every effort is made to ensure that technical
specifications are accurate. However, technical specifications and all other
information included herein should be used as a guideline only.
All specifications are subject to change
without notice.
|
